Sunday, October 21, 2007

The new brewery


In the house where I live there is a nice terrace and a little garden. It is great for brewing. The above photo was taken on the day when I brewed the weissbier. As you can see it was raining a little that day but that didn't stop me from brewing. In fact a little rain isn't a problem on brew day, at least as long as the burner or the pump doesn't get wet.

The new brewery consists of the following pieces of equipment:

A robust 100 liter stainless steel brew pot. The thickness is 1.2 mm. It is 50.8 cm wide and 50.8 cm tall. There are two 7/8" holes in it, one 1.5" above the bottom and the second 7" above the bottom. As you can see from the photo the holes are there for the weldless thermometer and the weldless spigot.

Bayou Classic Kick A Banjo Burner, a propane burner that outputs 65kW (210.000 BTU). This is definitely overkill by far, but it works great at [much] lower output. It can be adjusted all the way down, so that you can keep a cup of coffee warm. In my experience with two 40 liter batches it uses about 3.5 kg of propane per batch.


Two 11 kg propane gas containers. I bought two as it is nice to have a backup if the first one runs out. Then I can just go and get the second one from the shed. It also means that I can refill between brew days instead of having to do it on brew day. Or in worst case bringing the brewday to a halt if the propane shop is closed.

Hop Stopper, all stainless steel construction. It is installed inside the brew pot and works as a hop filter.

Therminator, a very effective plate-chiller. It is probably overkill for a brewery of this size, but it can't hurt. In any case it is very cool.

March H315 High Temperature Polysulphone Pump, a 230 volt impeller pump. I bought this one used from someone who had just recently upgraded to a much larger pump. It works nicely, but I find the fact that it needs to be primed a little annoying. If it had generated just a little suction it would have simplified the process of moving the wort.

5 meters of 1/2" silicone tubing, cut into 1, 1, and 3 meter pieces.

The brew stand is home made. The garden furniture works nicely, and was cheap too.

I bought the brew pot and the burner from Austin Homebrew Supply. As the brew pot was too big to ship through US Postal Service I got it shipped with boat freight via JetCarrier. I took advantage of the $5.99 shipping to their shipping hub in New Jersey. It took about a month before it arrived at my doorstep.



Austin Homebrew Supply:
1xSuper Stainless Steel Stock Pot (100 qt)$239.99
1xTwo holes drilled$19.99
1xHigh Output Propane Burner$99.99
1xTherminator Wort Chiller$195.00
1xBrewVint - Plate Chiller Backflush Adaptor$16.99
3xBlichmann Stainless Steel 1/2" QuickConnector$19.99

Innovative Homebrew Solutions:
1xHop Stopper, All Stainless Steel Construction$90.00

Northern Brewer:
1xWeldless Deluxe Plus, S/S Kettle Valve Kit w/barb$39.99

Morebeer:
1xThermometer (3'' Face x 2" Probe)$34.95

Wednesday, October 17, 2007

A quick update


Alright, enough procrastination. It has not been much of a summer this year as it has been cold and raining most of the time. Better luck next year I guess. A lot of things have happened since the last post though.

First of all I've built a whole new brewery. This one is dedicated to outdoors brewing. The plan is to use this brewery when the weather is OK and when it makes sense to brew bigger batches. In this part of the world this means early spring to late autumn.

The brew pot holds 100 liters, which in theory should make it possible to brew 80 liters of beer at a time. I have brewed with it twice this summer, an American IPA and a Weissbier. I'll post the recipes and my experiences with this new brewery shortly. In the meantime you get a photo of the brew pot and gas burner in action.

Wednesday, October 10, 2007

Brew #53: Weissbier

The batch was brewed 2007-10-10.

Style:
Weissbier
Type:
40 liters. All grain, batch sparge
Colour:
10 EBC (Golden)
Bitterness:
12 IBU
Malts:
7300g Wheat malt
5000g Pilsener malt
500g Melanoidin malt
500g Pale malt
400g Münchener malt
Mash:
67C, 60 min
76C, 10 min (mashout)
74% efficiency
Hops:
100g Hersbrucker pellets, 3.1%, 45 min
30g Styrian Goldings pellets, 3.2%, 15 min
Yeast:
Wyeast 3068 Weihenstephan Weizen Yeast, production date 2007-04-16, 2 liter starter
Boil:
60 min
OG: 1.052 FG: 1.016 abv: 4.8%

Sunday, August 19, 2007

Brew #52: India Pale Ale

The batch was brewed 2007-08-19.

Style:
India Pale Ale
Type:
40 liters. All grain, continuous sparge
Colour:
29 EBC (Reddish brown)
Bitterness:
52 IBU
Malts:
8000g Pilsener malt
1000g Crystal malt
1000g Amber malt
700g Biscuit malt
300g Wheat malt
Mash:
67C, 60 min
76C, 10 min (mashout)
55% efficiency
Hops:
60g Cascade pellets, 6.1%, 60 min
40g Centennial pellets, 9.4%, 15 min
40g Simcoe pellets, 12.1%, 15 min
70g Centennial pellets, 9.4%, 1 min
70g Simcoe pellets, 12.1%, 1 min
Yeast:
Safale US-05, 2 packs, dry yeast, best before date 2008-11-01.
Boil:
90 min
Water treatment:
2 ts calcium carbonate
OG: 1.045 FG: 1.011 (estimated) abv: 4.5%

Saturday, July 14, 2007

Malt varieties and terroir

Stan Hieronymous has written a couple of really interesting blog postings that I find particularly interesting. He draws lines between what the wine industry call terroir and the fact that the malts used by breweries have individual characteristics.

There is something to be said about the characteristics of a beer and what kinds of ingredients were used and where they were grown. The malt characteristics both depend on where it was grown and what malt variety it is. For beer's sake, at least for now, I think it is most to be said about the distinctions between malt varieties than than in which field it was grown. It is just too much of an unexplored field for anybody to say anything about terroir. The distinctions between malt varieties are much greater than between the same variety being grown in different locations.

The individualities in flavour of malt varieties is something that has not been considered by breweries and their marketing departments as something of interest. Great flavour has not been the primary reason for growing a malt variety -- economy has. A combination of how much barley could be produced per acre, the brewing efficiency, and the consistency of the malts have been the primary drivers.

Few people have thought that there have been any relationship between what malt varieties have been used to brew a beer and what the actual end result was. There are actually a lot of families of barley out there, most of them almost distinct and others grown on a very small scale. Large breweries have been mostly concerned about consistency and efficiency -- all for economic reasons. This has led to a reduced diversity of mass-produced malt varieties grown on a larger scale.

Fortunately, with the craft brewing revival, there is a new interest in traditional barley varieties. Traditional barley varieties like Maris Otter and Golden Promise are now being considered to be malt varieties that add an extra dimension to a beer.

I think that there is a lot of more things that is to be said about this subject.

Read what Stan said here:

Not all barleys are born equal
Malt (and barley) matters: Part II

Tuesday, July 10, 2007

Balancing draft beer systems


So far I have been very satisfied with the kegerator I built at the end of last year. It has been performing really well.

I am happy about the fact that the line balancing worked that well. There has been no problems balancing the CO2 pressure in the draft system. It seemed to me like rocket science when I started out, but in the end it was actually quite straightforward as long as I kept track of the various parameters involved. Most of the insights I got from this article. If you are planning on building your own draft beer system I highly recommend the article as it helped me a lot when designing the draft lines in the kegerator.

The fact that the beer line is only 3/16" ID, and relatively long, makes it possible to have quite a bit of pressure in the keg without excessive foaming. There is also about 60 cm of height difference between the center of the kegs and the faucets and this increases the friction in the beer lines and reduces the foaming.

I keep my CO2 regulator at a pressure of 1 bar and there does not seem to be much of a problem adjusting the pressure so that the whole system with four kegs is balanced.

Sunday, June 17, 2007

Brew #51: Imperial Porter

This porter is pretty much a replica of the porter I did two months ago. This time there is less black malt and a little more münchener malt. I liked the previous one a lot, but I thought that it had a little too sharp bite from the black malts. This is an attempt at making it a bit rounder. The increased mash temperature should also make it a little richer.

The single pack of dry yeast seems to have been plenty as the fermentation started soon after pitching and it is currently very vigorous.

The batch was brewed 2007-06-17.

Style:
Imperial Porter
Type:
All grain, batch sparge
Colour:
76 EBC (Black)
Bitterness:
41 IBU
Malts:
4500g Pale malt
1500g Münchener malt
550g Dark crystal malt
500g Amber malt
250g Crystal malt
250g Dark crystal malt
250g Carafa I, debittered chocolate malt
150g Carafa II, debittered black malt
Mash:
67C, 60 min
76C, 10 min (mashout)
72% efficiency
Hops:
30g Warrior pellets, 13.8%, 60 min
20g Warrior pellets, 13.8%, 10 min
Yeast:
Nottingham, 1 pack, dry yeast, best before date 2008-09.
Boil:
90 min
OG: 1.067 FG: 1.016 (estimated) abv: 6.7%

Brew #50: Roggenbier

I am quite excited about this beer. A roggenbier is like a dunkelweizen, except that the wheat malt has been fully replaced by rye malt. Not having tried a German roggenbier before I do look very much forward to doing so. It is going to be interesting to compare this batch with a commercial interpretation of the style -- once I get hold of one.

The mash smelled absolutely wonderful when I mashed in. The predominate aromas were rye bread and nutty chocolate. I am not particularly fond of pumpernickel bread, but I do like other kinds of rye bread.

When I started brewing I thought that I had 3 kg of rye malt on had, something I did not, so 750 grams were replaced by wheat malt. This means that the rye content is 40% and not above 50% as dictated by the BJCP style definition. But, who cares. I had absolutely no problem mashing the rye.

German wheat yeasts are supposed to be pitched a little low so that the clove and banana characteristics can develop more, so this time I did not make as starter. Instead I just poured the contents of the swollen smack-pack into the wort. I really wanted to try this out in a weissbier, but this will have to do for now.

The batch was brewed 2007-06-17.

Style:
Roggenbier
Type:
All grain, batch sparge
Colour:
32 EBC (Copper)
Bitterness:
12 IBU
Malts:
2250g Rye malt
1500g Münchener malt
1000g Pale malt
750g Wheat malt
250g Caramünich malt
250g Dark crystal malt
50g Carafa I, debittered chocolate malt
Mash:
67C, 60 min
76C, 10 min (mashout)
72% efficiency
Hops:
40g Tettnanger pellets, 2.7%, 60 min
18g Tettnanger pellets, 2.7%, 15 min
Yeast:
Wyeast 3068 Weihenstephan Weizen Yeast, production date 2007-04-16, no starter
Boil:
90 min
OG: 1.053 FG: 1.013 (estimated) abv: 5.2%

Thursday, June 07, 2007

Brew #49: Witbier

Witbier is, along with IPAs, a very popular beer style in this household. It is summer afterall and I just had to make another. This time I did a few twists of the earlier recipes. The recipe was different in that it used zest from two oranges and a lemon, ground coriander from a glass, steeped chamomile tea bags and dried yeast.

Fermentis, the producer of the Safbrew S-33 dried yeast packs, seems to be recommending the yeast for Belgian wheat beers, which I can only understand to be Witbiers. This is an experimental brew, so I've gone ahead and created a Witbier with it. In theory it doesn't sound that bad. Literature I've read say that the yeast is the Edme strain, which is seems to be a British yeast strain. What its origin is I do not know. There seem to be other dried variants of this yeast strain as well.

The batch was brewed 2007-06-05.

Style:
Witbier
Type:
All grain, batch sparge
Colour:
7 EBC (Pale yellow)
Bitterness:
14 IBU
Malts:
3000g Pale malt
3000g Raw wheat kernels
500g Oatmeal
300g Dry light malt extract
Mash:
66C, 60 min
76C, 10 min (mashout)
67% efficiency
Hops:
40g Styrian Goldings pellets, 3.2%, 60 min
30g Saaz pellets, 3.3%, 15 min
Other:
10g ground coriander
2 bags of chamomile tea
zest from two oranges
zest from one lemon
Yeast:
Safbrew S-33, 1 pack, dry yeast, best before date 2008-11-01.
Boil:
90 min
OG: 1.050 FG: 1.012 (estimated) abv: 5.0%

Update: Oslo is experiencing a heat wave this week. The fermentation temperature has reached 26C during the day, and thoughout the night it falls to about 21C. The outside temperature has been in the vicinity of 30C the last few days. The primary fermentation was over after two days and the fermentation bucket now sits idle. I'll leave it there for another week before kegging. The houses here do for obvious reasons not have any air conditioning systems, so there is not really much that one can do about this other than hoping for the beer not being ruined. This weekend's double brew, a German pilsener and a Roggenbier, has been postponed until the weather returns to something more normal. In the meantime I'm enjoying the nice sunny weather on the terrace.

Tuesday, June 05, 2007

What is the USPS thinking?

For some odd reason the US Postal Service has decided to drop their low-cost international shipping services. This leaves Global Express, Express and Priority, which all cost a fortune. I noticed this when I placed an order at Morebeer today. The shipping cost, which I had calculated to USD 70 suddenly became 164 USD. That's an incredible price hike. Heavier packages now effectively cost more than twice of what they were before May 15th this year. A positive side of this is that shipping now takes seven days instead of four weeks. But sometimes the money saved is worth waiting an extra three weeks for. Well, not anymore.

Dear old faithful USPS, what were you thinking? Why? Aaaaaargh...