It took the Citrus Grisette 20 days to reach its final gravity. Actually it went a little past to 1.008 (1.011 estimated), so the beer should hold around 4.8% abv. The WLP400 yeast has been slow every time I have used it. The foam in the fermentation tank came rushing out on the first day, but the fermentation soon slowed down. I therefore moved the fermentation tank to the bathroom at day four, so for the last 16 days it fermented at 24C. The high temperature didn't seem to affect the flavour in any way.
I always drink the sample that I take for the hydrometer jar. The beer seemed light and quite clean with a hint of coriander and citrus. It is always a bit hard to tell exactly how it will end up as there is still some yeast floating around and next to no carbonation in the sample.
The Scottish Export 80/- had an FG of 1.012 (1.011 estimated), so it was pretty much spot on. That should result in 4.2% abv. The yeast, WLP028, is an extremely fast fermenter as the entire beer fermented out completely in about three days. I didn't bother checking the gravity, but that's when the fermentation lock activity stopped. Lazy as I am, I waited for the Grisette to finish, so that I could keg them both at the same time. I've never had any noticeable side effects from leaving the beer on the yeast cake a few more days. I'll definitely use the Edinburgh yeast again.
The flavour is slightly biscuity from the amber malt. Quite nice actually. I was a bit curious about the effects of the amber malts, and 7% of the malt bill (400 grams) seems not to be too much. I'll probably use more of it in the next beer.
Saturday, December 30, 2006
Thursday, December 14, 2006
The cat ate my fermentation locks...

Our cat is a notorious hunter, and interested in anything that moves. Surprised I was when I woke up one morning finding the cat on top of one of the carboys chewing on the fermentation lock. I had brewed the beers the day before. The little cat had seemingly been hunting bubbles throughout most of the morning. Fortunately, no beer was hurt.


So, this is the reason why I no longer tighten the cap on the carboys. Instead I leave the cap loose, so that the CO2 can escape without going through the liquid in the fermentation lock. Ever since I did this the cat has lost interest. So, if you have a cat: beware. You have been warned.
Monday, December 11, 2006
Taking the new kettle for a spin

I thought that using the new kettle for the two batches yesterday was a little premature as I was unsure of whether the stove could actually bring 30 liters to a boil. Instead I used my old 20 liter and 13 liter pots to boil the 28-30 liters of wort retrieved from the mash. That has worked fine on this stove and it usually takes about 15 minutes to get the big pot to a boil from mashout temperature, and about the same time to get the little one to a boil, but that one is put on the stove 15 minutes later as it contains the output of the second [batch] sparge. As I boil the beer for a total of 90 minutes this works just fine as I can have both pots ready at a full boil for the first hop infusion at 60 minutes.
In order to find out whether the stove, on which the biggest element is 2000 watts (or 1800 watts for all I know), would be good enough for the job. I started out by filling the kettle with 30 liters of 12 degrees C tap water. This took exactly 2 hours to bring to a boil, at 100C, with the lid covering the the kettle.
Sugar solutions, like wort, have a slightly higher boiling temperature, so it will in theory require a bit more energy to reach a rolling boil. The stove was able to maintain a decent rolling boil even after I removed the lid. That's pretty good, but the time it took to reach a boil was substantial.
This all means that my stove is able to heat 30 liters of water at a rate of 0.73C per minute. In theory that means that it should be able to raise the wort from a mashout temperature of 76C to 100C in 17.6 minutes -- provided that there is no temperature loss between mashout and starting to heat the kettle. In real life I would expect something like 25 minutes.
So, given this, I think I'll give the brew kettle a try for my next brew, just to see how it behaves with actual wort and in a real setting. But, there is no doubt I will need a little more power to cut down on the time and make the boil more vigorous. One alternative might be to insulate the kettle.
Sunday, December 10, 2006
Brew #39: Scottish Export 80/-
Today's last brew is a Scottish Export, aka eighty shilling ale. It is a traditional Scottish session ale. The ale is somewhat dark and will hopefully have a malty and slightly nutty character balanced by crisp hops.
This is the first time I use Amber malt, and I'm looking forward to seeing how it affects the result. The yeast is a Scottish yeast strain, which is supposedly a real work-horse.
As per Charlie Papazian's recommendation I added 1/2 ts of cinnamon powder to the mash. This is done to prevent wort oxidization as cinnamon is an efficient antioxidant. I did this to the Grisette as well. The cinnamon should not have any influence on the flavour of the finished beer, at least that's what he said. We'll see. I also used 2 ts of 5.2 in the mash.
For the record: the pale malt was 3700 grams Muntons Pearl Pale Malt and 800g of Castle Pale Malt as I ran out of the first. The Amber malt is from Castle Malting and the Crystal malt from Muntons.
I got terribly low mash efficiency with this beer also. Now I suspect that the crush on the malt mill is too coarse. I'll try to reduce the roller gap for the next brew.
The batch was brewed 2006-12-10.
Style:
Scottish Export 80/-
Type:
All grain, batch sparge
Colour:
26 EBC (Light copper)
Bitterness:
23 IBU
Malts:
4500g Pale malt
500g Crystal malt
400g Amber malt
250g Wheat malt
Mash:
67C, 60 min
76C, 10 min (mashout)
62% efficiency
Hops:
40g East Kent Goldings pellets 4.9%, 60 min
40g Fuggles pellets 5.1%, 15 min
30g Cascade pellets 5.9%, 1 min
Yeast:
White Labs WLP 028 Edinburgh Ale, best before 2006-09-16, 1 liter starter
Boil:
90 min
OG: 1.044 FG: 1.011 (estimated)
This is the first time I use Amber malt, and I'm looking forward to seeing how it affects the result. The yeast is a Scottish yeast strain, which is supposedly a real work-horse.
As per Charlie Papazian's recommendation I added 1/2 ts of cinnamon powder to the mash. This is done to prevent wort oxidization as cinnamon is an efficient antioxidant. I did this to the Grisette as well. The cinnamon should not have any influence on the flavour of the finished beer, at least that's what he said. We'll see. I also used 2 ts of 5.2 in the mash.
For the record: the pale malt was 3700 grams Muntons Pearl Pale Malt and 800g of Castle Pale Malt as I ran out of the first. The Amber malt is from Castle Malting and the Crystal malt from Muntons.
I got terribly low mash efficiency with this beer also. Now I suspect that the crush on the malt mill is too coarse. I'll try to reduce the roller gap for the next brew.
The batch was brewed 2006-12-10.
Style:
Scottish Export 80/-
Type:
All grain, batch sparge
Colour:
26 EBC (Light copper)
Bitterness:
23 IBU
Malts:
4500g Pale malt
500g Crystal malt
400g Amber malt
250g Wheat malt
Mash:
67C, 60 min
76C, 10 min (mashout)
62% efficiency
Hops:
40g East Kent Goldings pellets 4.9%, 60 min
40g Fuggles pellets 5.1%, 15 min
30g Cascade pellets 5.9%, 1 min
Yeast:
White Labs WLP 028 Edinburgh Ale, best before 2006-09-16, 1 liter starter
Boil:
90 min
OG: 1.044 FG: 1.011 (estimated)
Brew #38: Citrus Grisette
This is an interpretation of an old Belgian beer style called Grisette. It is generally considered to be a low-alcohol version of a saison. In fact this one is quite similar to a witbier, as you can see from the recipe. The Grisettes generally have less wheat in them than in this recipe. All the witbiers I've made so far have had dried bitter orange peel and sweet orange peel in them. This time I wanted to experiment with zest from fresh lemon and lime.
I'm still struggling to get a proper mash efficiency when brewing witbiers. This time I mashed all the raw wheat with 1/3 pilsner malts for about 20 minutes. Then I boiled the mix for about 20 minutes to gelatinize the wheat before dumping it into the mash tun with the rest of the malts. Still, the mash efficiency of 64% is much better than the 55% got the last time when I did not boil. It does indeed look like it pays for itself to boil the mix.
The batch was brewed 2006-12-10.
Style:
Grisette
Type:
All grain, batch sparge
Colour:
6 EBC (Pale yellow)
Bitterness:
14 IBU
Malts:
3000g Pilsner malt
3000g Raw wheat kernels
Mash:
64C, 60 min
76C, 10 min (mashout)
64% efficiency
Spices:
zest from 1 lemon
zest from 1 lime
15 g coriander seeds
15 black pepper corns
Hops:
50g Tettnanger pellets 2.7%, 60 min
20g Tettnanger pellets 2.7%, 15 min
Yeast:
White Labs WLP 400 Belgian Wit, best before 2006-09-16, 1 liter starter
Boil:
90 min
OG: 1.045 FG: 1.011 (estimated)
I'm still struggling to get a proper mash efficiency when brewing witbiers. This time I mashed all the raw wheat with 1/3 pilsner malts for about 20 minutes. Then I boiled the mix for about 20 minutes to gelatinize the wheat before dumping it into the mash tun with the rest of the malts. Still, the mash efficiency of 64% is much better than the 55% got the last time when I did not boil. It does indeed look like it pays for itself to boil the mix.
The batch was brewed 2006-12-10.
Style:
Grisette
Type:
All grain, batch sparge
Colour:
6 EBC (Pale yellow)
Bitterness:
14 IBU
Malts:
3000g Pilsner malt
3000g Raw wheat kernels
Mash:
64C, 60 min
76C, 10 min (mashout)
64% efficiency
Spices:
zest from 1 lemon
zest from 1 lime
15 g coriander seeds
15 black pepper corns
Hops:
50g Tettnanger pellets 2.7%, 60 min
20g Tettnanger pellets 2.7%, 15 min
Yeast:
White Labs WLP 400 Belgian Wit, best before 2006-09-16, 1 liter starter
Boil:
90 min
OG: 1.045 FG: 1.011 (estimated)
Saturday, December 09, 2006
My new brew kettle

I got a new brew kettle in the mail today. I bought it from Brew 4 less for only USD 99. It holds 34 liters (9 gallons) and is made from type 304 stainless steel. That should be plenty of room for my 25 liter brews, but it is not big enough should I wish to step up to 40 liter batches in the future.
The kettle comes with a lid, a built-in thermometer gauge with Fahrenheit and Celsius scales and a brass ball value. Other similar kettles cost between 200 and 250 USD, so this is quite a bargain.
The thermometer is primarily useful when cooling the wort in the kettle. It will allow me to see when the wort is cold enough to transfer. The ball value has a 3/8" barb that lets me connect heat resistant silicone tubing, so that I can drain the wort directly into the fermenter.
Overall it looks quite sturdy. The only defect I've found is that one end of the lid handle had broken loose. It seemed like the glue had loosed. I've now added more glue, so we'll see if that fixes it or not. This is really a minor issue, and I'm pretty sure I'll be able to repair this.
Now the big question is whether my stove can actually bring 30 liters of wort to a boil.



Friday, December 01, 2006
Belgian Amber

In May this year I brewed a Belgian Amber (aka. #33) at 6.6% abv. I originally intended it to be a Dubbel, but it ended up a bit too light in colour, hence the Amber designation. I used the much hyped liquid dark candy sugar that you now can get in homebrew shops, particularly in the U.S., but also here in Europe. The hype started because Stan Hieronymus wrote about it in his book Brew Like a Monk and later in a blog posting. Up until then people had thought that the Belgian brewers had used [expensive] crystallized candy sugar. According to his book the real ingredient is liquid, not crystallized, dark candy sugar.
The Belgian Amber was brewed with the WLP500 yeast from White Labs. This is supposedly the Chimay strain. I've brewed with it once before and it is indeed very characteristic with a lot of banana character, even when brewed at temperatures around 19-20 degrees C. After six months the banana aromas are now gone. It was a bit disappointing at first, but the beer has finally mellowed out and become a really nice Belgian style ale. The beer itself is slightly sweet and nicely balanced by hops.
In the near future I'm planning on making a stronger and darker Belgian ale, something resembling Westvleteren Abt 12 or St. Bernardus Abt 12. More about this in a little while.
Thursday, November 30, 2006
A fifth faucet. *sigh*
Sorry. When I got a tip about there being cheap stout faucets available on eBay I couldn't resist. The thing is called a Dalex Free-flow Tap with flow control. It's not particularly pretty, but I've got big hopes for the heads on my future stouts.
I managed to squeeze it in between the two middle chrome faucets. If you look closely at the photo taken inside the fridge you can see that there was just a small area where it could be mounted. The shank was also just long enough for the nut to get a grip. Next step is to hook up the new faucet to the keg containing oatmeal stout. Yummy. This hobby is clearly living its own life...
Monday, November 20, 2006
Kegerator: a walkthrough
Here are a few photos illustrating what the kegerator looks like now and how all the pieces were connected.

This first photo shows what the fridge looked like right after I started on the project. I used brown tape to line up the faucets, measuring exactly how each of the taps were to be placed. The tape, a black marker pen and a measuring stick helped with keeping them in line with an exact distance between each. If you look closely you can see the second hole having been drilled, but the faucet not yet connected.
You can also see the temperature controller that is managing the temperature level in the fridge. A small black probe runs into the fridge through the door lining.

The remaining photos were taken after the kegerator was finished. The photo above includes the CO2 tank and the gas line running into the fridge through a small hole in the fridge wall. The gas line is about 2 feet of 5/16 inch ID (inner dimension). The gas line is connected to the CO2 regulator with a swivel nut and a 1/4 inch stem. The gas line is then thread onto the connecting barb. I had to dip the various gas and beer lines in really hot water to be able to get them onto the barbs. Without the hot-water trick it would have been almost impossible, especially with the 5/16 inch barb on the gas manifold below.
I had feared that there would be cooling lines running through the sides of the fridge, so I drilled very carefully when doing the hole on the right side. Fortunately there were no such lines. I had also heard mentions of such cooling lines only existing in really old refridgerators. Newer ones rely on cooling just in the back. I'm not sure if that means cooling lines in the back wall or just the metallic cooling plate inside the fridge.

Here we're inside the fridge and you can see the gas line coming in through the wall from the outside. You cannot actually see it here, but the gas line is connected through a quick connect before being hooked onto the [golden] manifold that you can see in the back. This is a four-way gas manifold with individual shut-off handles. From the manifold four gas lines run into a keg each. You can see one of the black ball-lock gas quick-connects attached to the gas-in connect on the keg below.
I added the quick connection to the gas line so that I later can disconnect the manifold and run the gas line directly to one keg. That would typically happen when I would want to carbonate a keg quickly at high pressure. I don't think it'd make sense to run that through the manifold.

The white ball-lock quick connect is attached to the liquid-out connect on the keg. Because the gas will be pushed in through the gas-in connect the beer will be pushed out though this one.

This is the fridge door and the shanks connected through it. The shanks are 1 inch thick, so the holes are also that size. The shank tail-piece is then connected to the beer line through a barb and an adjustable clamp. Note that I've used these adjustable clamps everywhere a line is connected to a barb. There should be twenty of them; 4 connected to the shanks, 4 to the beer line going into the kegs, 4 to the gas line going out of the kegs, 4+1 on the manifold, 2 on the gas quick connect and finally 1 on the regulator.

Here you can see all four shanks. Note that the fourth one, on the left, is not yet connected to a beer line, so only three beers are on tap at the moment.

This is a nice view from above of the four faucets and the drip tray on the fridge front.


Finally, two photos giving a somewhat fuller view.
Note that I've chosen to use swivel nuts and adjustable connects everywhere, so that all parts can be easily disassembled and cleaned. OK, enough kegerator postings for now.

This first photo shows what the fridge looked like right after I started on the project. I used brown tape to line up the faucets, measuring exactly how each of the taps were to be placed. The tape, a black marker pen and a measuring stick helped with keeping them in line with an exact distance between each. If you look closely you can see the second hole having been drilled, but the faucet not yet connected.
You can also see the temperature controller that is managing the temperature level in the fridge. A small black probe runs into the fridge through the door lining.

The remaining photos were taken after the kegerator was finished. The photo above includes the CO2 tank and the gas line running into the fridge through a small hole in the fridge wall. The gas line is about 2 feet of 5/16 inch ID (inner dimension). The gas line is connected to the CO2 regulator with a swivel nut and a 1/4 inch stem. The gas line is then thread onto the connecting barb. I had to dip the various gas and beer lines in really hot water to be able to get them onto the barbs. Without the hot-water trick it would have been almost impossible, especially with the 5/16 inch barb on the gas manifold below.
I had feared that there would be cooling lines running through the sides of the fridge, so I drilled very carefully when doing the hole on the right side. Fortunately there were no such lines. I had also heard mentions of such cooling lines only existing in really old refridgerators. Newer ones rely on cooling just in the back. I'm not sure if that means cooling lines in the back wall or just the metallic cooling plate inside the fridge.

Here we're inside the fridge and you can see the gas line coming in through the wall from the outside. You cannot actually see it here, but the gas line is connected through a quick connect before being hooked onto the [golden] manifold that you can see in the back. This is a four-way gas manifold with individual shut-off handles. From the manifold four gas lines run into a keg each. You can see one of the black ball-lock gas quick-connects attached to the gas-in connect on the keg below.
I added the quick connection to the gas line so that I later can disconnect the manifold and run the gas line directly to one keg. That would typically happen when I would want to carbonate a keg quickly at high pressure. I don't think it'd make sense to run that through the manifold.

The white ball-lock quick connect is attached to the liquid-out connect on the keg. Because the gas will be pushed in through the gas-in connect the beer will be pushed out though this one.

This is the fridge door and the shanks connected through it. The shanks are 1 inch thick, so the holes are also that size. The shank tail-piece is then connected to the beer line through a barb and an adjustable clamp. Note that I've used these adjustable clamps everywhere a line is connected to a barb. There should be twenty of them; 4 connected to the shanks, 4 to the beer line going into the kegs, 4 to the gas line going out of the kegs, 4+1 on the manifold, 2 on the gas quick connect and finally 1 on the regulator.

Here you can see all four shanks. Note that the fourth one, on the left, is not yet connected to a beer line, so only three beers are on tap at the moment.

This is a nice view from above of the four faucets and the drip tray on the fridge front.


Finally, two photos giving a somewhat fuller view.
Note that I've chosen to use swivel nuts and adjustable connects everywhere, so that all parts can be easily disassembled and cleaned. OK, enough kegerator postings for now.
Thursday, November 09, 2006
Building the kegerator: finding the parts
It has now been a few weeks since I installed the taps on the refrigerator, effectively making it a kegerator. I'm very happy with it so far and it has worked very well.
There are three kegs connected, serving a Witbier, a Christmas beer and an Oatmeal Stout. The fourth tap will have to wait a little as I'm missing a gas quick disconnect. I don't know why it got lost. The flow rate and carbonation levels seem to be quite alright, except that I seem to be having a leaky keg leaving the Witbier a bit low in carbonation. I tend to close the CO2 tank when the kegerator is not in use, just so that I don't end up with an empty tank without wanting to. I'll have to take a closer look at the keg to give it a better seal. A little lubricant and a tighter lid might help.
Much of the challenge of designing it has been to get hold of all the necessary pieces so that it would actually work. Below you'll find a list of all the components that I used. I bought the equipment from MoreBeer and Brewers Discount.
Update: After rechecking the setup I realize that it is a ninth swivel-nut and stem that I am missing, and not a gas-in quick disconnect. The reason is that I had to use one to connect the gas line to the CO2 regulator. I've updated the costs above accordingly.
There are three kegs connected, serving a Witbier, a Christmas beer and an Oatmeal Stout. The fourth tap will have to wait a little as I'm missing a gas quick disconnect. I don't know why it got lost. The flow rate and carbonation levels seem to be quite alright, except that I seem to be having a leaky keg leaving the Witbier a bit low in carbonation. I tend to close the CO2 tank when the kegerator is not in use, just so that I don't end up with an empty tank without wanting to. I'll have to take a closer look at the keg to give it a better seal. A little lubricant and a tighter lid might help.
Much of the challenge of designing it has been to get hold of all the necessary pieces so that it would actually work. Below you'll find a list of all the components that I used. I bought the equipment from MoreBeer and Brewers Discount.
MoreBeer:
Brewers Discount:
| 4x | Shank Assembly with 4 1/8" Shank | $118.00 |
| 4x | BL010-QD Gas 1/4" MFL | $15.00 |
| 4x | BL010-1-QD Liquid 1/4" MFL | $15.00 |
| 9x | H011-Swivel Nut and Stem 1/4" | $14.85 |
Total cost: USD 288.50 (plus shipping and VAT)
Hopefully the list is helpful and that it might help you get started on your own kegerator.Update: After rechecking the setup I realize that it is a ninth swivel-nut and stem that I am missing, and not a gas-in quick disconnect. The reason is that I had to use one to connect the gas line to the CO2 regulator. I've updated the costs above accordingly.
Subscribe to:
Posts (Atom)