Monday, June 04, 2007

Fermentation buckets: pros and cons


The India Pale Ale is fermenting happily in one of the new fermentation buckets. Since the buckets hold 32 liters there is quite a bit of head space in there, so I do not have to worry too much about the fermentation overflowing.

After having tried one of these fermentation buckets I have found a few things that are good and bad about them:

Pros:
  • Easier to clean as one can reach into them by opening the lid. One has to be a little careful so that it does not pick up any scratches. A soft non-scratching cloth is needed.
  • The bucket has a flat top which means that one can stack them on top of each other saving a little space while fermenting. On the other hand this also means that the cat can sleep there.
  • The stackability is even more useful when storing them between use. Four buckets take up just as little space as one of them do.
Cons:
  • A bucket does not fit very well in my kegerator. The old fermentation tanks was just a little wider that a cornelius keg, so I could fit one of them in the fridge with three cornelius kegs. Not so with the new fermentation buckets. From what I can gather there is not room for any kegs together with a bucket. I'll have to try and find one of the old type, so that I can ferment my lagers in it.
  • It is harder to oxygenate the wort as one cannot vigorously shake the bucket. With the old tanks I could just close them with a lid and shake hell out of them. Pouring the wort from the siphon from a height did seem to work nicely, but it is not perfect. I'll have to look into getting hold of an aquarium pump and an oxygenation stone.
Anything else?

Sunday, June 03, 2007

Brew #48: India Pale Ale

The IPAs I make seem to disappear rather quickly, so I do have to make them quite often. In order to keep the hop levels in the blood stream up throughout the summer it's time to make another one.

This one is intended to be a little nutty and somewhat on the rich and malty side. I used the new digital thermometer, so we'll see if the fermentability is a little lower this time. When comparing the measurements with the old thermometer there seemed to be a 2C difference between the two, with the new one giving the lower result. Given the recent experiences that makes sense.

There is quite a bit of finishing hops in this beer. Since I had reached the bottom of the big bag of Warrior hop pellets I thought that I just as well might add the rest of it. I have a 1.5 kg bag left, so it's going to take quite a while before I run out of Warrior hops. In my opinion there can never really be enough aroma hops in an IPA.

This batch will be fermented in one of the brew fermentation buckets.

The batch was brewed 2007-06-03.

Style:
India Pale Ale
Type:
All grain, batch sparge
Colour:
24 EBC (Deep amber)
Bitterness:
64 IBU
Malts:
5500g Pale malt
700g Munich malt
500g Carapils
300g Wheat malt
300g Crystal malt, 130 EBC
250g Victory malt
Mash:
67C, 60 min
76C, 10 min (mashout)
72% efficiency
Hops:
30g Warrior pellets, 13.8%, 60 min (first wort and bittering hops)
30g Warrior pellets, 13.8%, 10 min
30g Palisade pellets, 9.3%, 10 min
140g Warrior pellets, 13.8%, 1 min
70g Palisade pellets, 9.3%, 1 min

Yeast:
Safale US-05, 2 packs, dry yeast, best before date 2008-11-01.
Boil:
90 min
OG: 1.068 FG: 1.017 (estimated) abv: 6.7%

Monday, May 14, 2007

The last four

All of the last four beers have been pretty good beers. Unfortunately they have all been a bit too dry. I blame this on the two thermometers I use, one digital and one alcohol thermometer. The alcohol thermometer did measure two degrees Celsius lower than the digital. I did trust the digital one, but it does seem like the analog one is the more accurate one.

Two new high quality thermometers have been ordered, so I hope to have better results in the future.

Because I have used the digital thermometer all since I started brewing all-grain all of my beers have been fairly dry even though I have tried to make more sweeter beers. The attempts haven't been wholehearted, but I would think that a saccharisation rest at 69C should end up with a predominantly sweet beer.

#44 India Pale Ale, 7.6%: Light copper colour. The beer lacked the same roasted and nutty complexity that the previous IPA had. It was pretty good, but it was lighter in colour and ended up with much more alcohol than the previous one. I wasn't particularly satisifed with the hops. The Columbus provided as harsh bitterness and the Amarillo a pungent grassy flavour. Not what I find appropriate in an IPA.

#45 Altbier, 5.1%: Dark copper colour. In my opinon the best one of the four. Drying hop flavour from the Spalt hops. I had expected it to be more bitter, but the hops did lend more flavour than bitterness. Spalter Select is a nice hop which I'll use in other beers. The flavour also had quite a bit of caramel and chocolate.

#46 Weissbier, 6.4%: Cloudy pale golden colour. This one ended up way too dry and subsequently with a way too high alcohol content for the style. The alcohol level was not obvious in any way, but the dryness and the light body did not fit the style well. There was quite a bit of clove character in the beer, which I also tried to enhance by doing an acid rest. Unfortunately it is pretty obvious that the problems I had trying to raise the temperature to the saccharification rest did have an effect on the fermentability. There was next to no banana flavour in the beer even though the fermentation was very vigorous and the ambient temperature passed 22C at one time, but at an average the temperature was 19C.

#47 Imperial Porter, 6.8%: Pitch black. The soft water in Oslo has been playing tricks with me before and even this beer had some astringent characters from dark malts, but far from as strong as the previous porter I made. This time I used 500 grams of dark malts, chocolate malt and black malt, both debittered varieties. The beer has a distinct and somewhat sharp roastedness. The hops where pretty subdued, but balanced the malts nicely. This was a pretty clean and dry beer with the distinct character of darker malts. Would have been better with some more malt complexity.

Sunday, May 06, 2007

New fermentation buckets


New fermenters have been acquired. I ended up with four 32 liter fermentation buckets. They cost me 80 NOK each. I really had thought that I should get hold of the same kind of fermenters that I had earlier, but the LHBS did not have any. He didn't have any glass carboys either, so I had to do with these.

The buckets have markings going up to 27 liters, but by extrapolating I estimate that they will hold at least five more liters. The old carboys were only 28 liters. Given that I make 25 liters of wort at a time they did not have much head space. For vigorous fermentations that's certainly a bit tight. The recent weissbier and the imperial porter did both cause a big mess as the carboys overflowed. That has happened a lot of times earlier also.


This is the imperial porter. The weissbier was even more vigorous and I lost almost three liters of beer this way. With the new buckets I should be able avoid this, saving both beer and not having to clean up the mess.

The buckets should be easier to clean as they are much more accessible. With the old carboys I had to use a carboy brush, which worked reasonably well once I had soaked the carboys in washing soda (sodium carbonate) overnight. Given the better accessibility I would think that they would more easily pick up scratches. We'll see.

I have another five such buckets which I use to soak and clean equipment and bottles in. They have been treated pretty roughly, so they are full of scratches and cannot be used as fermentors. As you can see on the above photo I have marked the buckets so that I do not mix them up.

To be honest I really do want to upgrade to a couple of 55 liter Blichmann Fermenators, but because of space constraints I have to wait until I have somewhere to put them. There just isn't anywhere to place them in our current apartment. Someday maybe...

Thursday, April 26, 2007

Time to replace the fermentation vessels

The ESB had a slight bacterial infection. It had lost all of its malt flavours and there were next to no hop aroma, making it monotonous, grassy and slightly dry. It also had an astringent yeast-like character, but I don't think that has got anything to do with the yeast at all. The infection started out as just a hint of altered flavours, but has over the last couple of weeks become much more evident. It is without a doubt an infection. At this rate I pick up an infection every 35 batches. This is the second time it has happened.

I judged a couple of flights at this year's Norwegian Homebrewing Championships and noticed that a couple of the entries had the same defect. At that time I suspected that it was a fermentation issue, most likely caused by autolysis or bad yeast health. I'm now confident that it is indeed a small bacterial infection, or the beginning of one.

There's nothing that one can do about a bacterial infection other that to discard the beer. I'm sure you could drink it, but life's too short. Unlike other defects there's actually no steps you can take to improve the beers drinkablity. So the ESB is going to make do as fertilizer in the garden.

Interestingly the three beers I have brewed after the infected one do not have any signs of infection. This has led me to suspect that it is the fermentation vessel that has caused the infection. It could of course also have been a mistake made by yours truly.

Plastic has the unfortunate characteristic that it easily get scratched over time, and those scratches can harbour bacteria. I have four plastic fermentation vessels and I do think I used all four on those last four beers, so it seems that none of the other beers touched the infected one.

Anyway, my plastic fermentation vessels are five years old. I should have replaced them earlier, but they have now for sure reached their end of duty. They were thrown out yesterday together with the plastic tubing.

New fermenters will have to be bought ASAP as I have more work to do before the summer.

Thursday, April 19, 2007

How to clean a picnic faucet



Did you know that you can take the picnic faucet apart? I didn't. It came as a surprise to me when I saw Richard rip one apart and explain that that would expose all the surface that the beer touches. It consists of two individual pieces. That's great as I had suspected that just running cleaner and sanitizer through wouldn't be enough to clean it.

I am a bit scared of what I'll find when I open one, especially the older ones. I can't say I've had any off-flavours when using them, but I fear the worst. In any case they can all expect thorough cleaning before being used the next time.

Monday, April 16, 2007

Brew #47: Imperial Porter

Too many of my recent brews have been brownish in colour, so it was now time to make something really dark. The intention was to make a normal strength robust porter at around 6.0% abv, but the mash efficiency was pretty good for a dark beer and it came out as an imperial porter. Things could have been worse.

I have had terrible mash efficiencies when making dark beers earlier. Fortunately things went better this time.

An extraordinarily fine crush made by Frode's Crankandstein (or is it Crankenstein monster?) must have contributed somewhat, but not enough to replace the Barley Crusher though. I noticed a lot of dry grain balls in the mash as I doughed in, but a few minutes of stirring made them go way. So it was clear that the crush was much finer than what I have had earlier. There were no hints of any run-off problems, so the crush is fine. I also tried to sparge a little slower than at full speed making it more likely to extract more sugars. Each sparge took about 10 minutes, which is still a reasonably short time. I'll consider reducing the gap my own Barley Crusher for the next brew. It is currently set to the default.

The water in Oslo is extremely soft, very much like the water in Plzen, something that makes it perfect for light beers like pilsener. At the same time this makes it harder to make dark beers. Soft water is really the perfect brew water as it is a lot easier to add minerals than it is to take them out. So to emulate the water of other famous brewing cities one can just add minerals.

I made a porter with 500 grams of chocolate malt and black malt about a year and a half ago, which turned into something very harsh and astringent. I blame the pH of the water. A low pH means a lower mash efficiency and extraction of undesired characteristics like tannins. This time I added 2.5 ts calcium carbonate and 2 ts of 5.2 powder. The recipe also use dehusked dark malts, which should keep the sharp edges out of the beer. I also added the dark malts 45 minutes into the mash, giving the base malt a better chance of converting itself before the pH gets lowered by the dark malts.

The batch was brewed 2007-04-16.

Style:
Imperial Porter
Type:
All grain, batch sparge
Colour:
80 EBC (Black)
Bitterness:
40 IBU
Malts:
5000g Pale malt
1000g Munich malt
500g Amber malt
400g Crystal malt, 300 EBC
400g Crystal malt, 130 EBC
250g Carafa I, debittered chocolate malt
250g Carafa II, debittered black malt
Mash:
68C, 60 min
76C, 10 min (mashout)
72% efficiency
Hops:
30g Warrior pellets, 13.8%, 60 min
20g Warrior pellets, 13.8%, 10 min
Yeast:
Nottingham, 2 packs, dry yeast, best before date 2007-01-15 and 2007-12-01.
Boil:
90 min
OG: 1.068 FG: 1.017 (estimated) abv: 6.7%

Wednesday, April 11, 2007

Brew #46: Weissbier

It has been a really long time since I brewed a German weissbier. Too long, in fact two years ago. That's even before I started kegging my beers. Heck, it is one of my favourite beer styles, and perfect for the upcoming warm season.

The recipe is straightforward. I did an acid rest this time as it will improve the clove flavours. I used the Wyeast 3068 yeast, which in my opinion is the best weissbier yeast that there is. It'll generate little banana, but that depends a little on the fermentation temperature.

The wheat malt percentage is quite high at 59%, which is quite high, but still quite common. Wheat malt can be notoriously difficult to sparge as it easily clogs up the mash. I have been impressed by the Bazooka screen in my mash tun as it seems to work really well even with malt bills that are hard to sparge. I tried to batch sparge as quickly as possible and opened the ball valve fully from the start. The mash soon compacted on itself and the grains moved about 3 cm from the walls towards the Bazooka. Alright, a stuck sparge, but it was really easy to get the flow going again. Cutting into the grains with a knife released the vaccuum and the sparge continued at a nice rate. I can very much recommend the Bazooka screen. It's pretty impressive. It is also quite cool that a stuck mash is nothing to be afraid of as one can just cut or stir the mash to start the sparge again.

I decided to add a little melanoidin malt to add some complexity and fill out the body.

The batch was brewed 2007-04-11.

Style:
Weizen/Weissbier
Type:
All grain, batch sparge
Colour:
9 EBC (Golden)
Bitterness:
14 IBU
Malts:
3500g Wheat malt
2500g Pilsener malt
200g Melanoidin malt
Mash:
44C, 15 min (acid rest)
64C, 60 min
76C, 10 min (mashout)
73% efficiency
Hops:
50g Tettnanger pellets, 2.7%, 60 min
20g Tettnanger pellets, 2.7%, 10 min
Yeast:
Wyeast 3068 Weihenstephan Weizen Yeast, production date 2007-01-15, 1 liter starter
Boil:
90 min
OG: 1.055 FG: 1.013 (estimated) abv: 5.5%

Monday, March 26, 2007

Brew #45: Düsseldorf Altbier

Altbier is a beer that I have drunk on several occasions while visiting Germany, and I have enjoyed all of the variants I have tried. I have not been to Düsseldorf yet, but it sure is on my short list of beer cities to visit. Commerical examples seem to range from malty sweet to intensely bitter.

This recipe is for an Altbier that is on the upper end of the OG and bitterness ranges. I have tried to make it a bit sweet and with some complexity, and balanced by 35 IBUs. That should make it a nice spring beer I hope. It will have to be lagered in the fridge for a few weeks before drinking though.

The brew day lasted 5 hours and 50 minutes, of which 40 minutes was spent trying to get the wort into the fermenter. I will never ever again use whole hop cones with my current brew setup. The easy-siphon clogged and it was almost impossible to get a siphon from the brew kettle. I have used whole hops before, and do remember that I have had similar problems, but never this serious. The Spalt hops were quite small, so that might have something to do with it. I literally had to pump the wort, and that didn't always work either until I had cleared the opening. Anyway, lesson learned.

The batch was brewed 2007-03-26.

Style:
Düsseldorf Altbier
Type:
All grain, batch sparge
Colour:
34 EBC (Light brown)
Bitterness:
35 IBU
Malts:
2500g Pilsener malt
1500g Vienna malt
1300g Münchener malt
700g Cara-münich malt
50g Debittered chocolate malt
50g Debittered black malt
Mash:
67C, 60 min
76C, 10 min (mashout)
73% efficiency
Hops:
60g Spalter Select whole, 5.2%, 60 min
40g Spalter Select whole, 5.2%, 10 min
Yeast:
Wyeast 1007 German Ale Yeast, production date 2006-11-17, 1 liter starter
Boil:
90 min
OG: 1.054 FG: 1.013 (estimated)

Sunday, March 25, 2007

Brew #44: India Pale Ale

The previous IPA was a success. We ran out of it last Saturday, so my wife asked me to make another preferrably using the exact same recipe. That was easier said than done as I had no more Crystal (135 EBC) and no more Safale US-56 dry yeast. I adjusted the recipe to use some Cara-münich malt and the Rogue Pacman yeast. I also took out the Chinook hops and added Columbus. The Amarillo also got upped a bit. In the end I think it is going to taste much the same.

Being somewhat feverish at the time I also forgot to add the mash hops, so I decided to make up for some of it by first wort hopping the 60 minutes addition of Amarillo.

The mash efficiency improved a bit this time as I tried to crush the grist a little finer. Still no sparge problems through, so there is more to go on I think.

The batch was brewed 2007-03-25. The brew day lasted 5 hours and 10 minutes.

Style:
American IPA
Type:
All grain, batch sparge
Colour:
33 EBC (Light brown)
Bitterness:
61 IBU
Malts:
6000g Maris Otter pale malt
1000g Amber malt
450g Crystal malt
400g Wheat malt
300g Cara-münich malt
200g Melanoidin malt
Mash:
66C, 60 min
76C, 10 min (mashout)
69% efficiency
Hops:
50g Amarillo pellets, 8.4%, first wort hops and boiled 60 min
30g Columbus pellets 12.2%, 30 min
30g Warrior pellets 13.8% 10 min
80g Amarillo pellets 8.4%, 1 min
Yeast:
Wyeast Rogue Pacman Ale Yeast, production date 2006-11-17, 1 liter starter
Boil:
90 min
OG: 1.072 FG: 1.018 (estimated)